Industraline™, our HDPE geomembrane and matched geotextile range for civil, marine, mining and aquaculture lining.
Industraline™ is the brand of HDPE geomembrane manufactured and supplied by Industrial Plastics from our Brisbane workshop. We supply the geomembrane in pond, dam, mining, landfill, civil and aquaculture grades, plus matched non-woven geotextile underlay, prefabricated pipe boots, and AquaSeal™ jointing tape, every component sourced from a single product line so on-site weld bonds are predictable.
Brisbane workshop, since 1971. ISO 9001:2015 certified by SGS. Welders qualified to DVS 2207. Pre-welded panels and on-site seam-welding for large installations. AS/NZS 4020 potable-rated grades available.
Industraline HDPE Geomembrane Installation Manual & Specification Pack, v2.0
Twenty pages of recommended installation practice, anchor trench detail, pipe penetration boots, dual-track wedge welding, QA testing, and tender-ready specification clauses ready for paste-into-tender use.
Free PDF · 2.7 MB · May 2026 · Replaces 2020 edition
The Industraline range
Four HDPE geomembrane grades plus matched accessories. Each grade is UV-stabilised; potable-rated grades are independently certified to AS/NZS 4020.
| Grade | Thickness | Typical applications | Design life |
|---|---|---|---|
| Industraline Standard | 1.0 to 1.5 mm | Stock dams, irrigation reservoirs, dairy effluent, fish ponds, aquaculture | 20 to 30 years |
| Industraline HD | 2.0 mm and above | Mining tailings, leach pads, industrial process ponds, bunded chemical containment | 40+ years |
| Industraline Potable | 1.0 to 2.0 mm | Stock-water reservoirs, rural drinking-water storage. AS/NZS 4020 compliant | 20 to 30 years |
Full thickness, density, and chemical-compatibility tables are in the Installation Manual. For aggressive service (concentrated acids, strong oxidisers, aromatic hydrocarbons in continuous contact), request an Industraline chemical-compatibility statement before specifying.
Industraline accessories
- Geotextile underlay, Non-woven needle-punched geotextile (200 to 400 gsm) for puncture protection on rocky subgrades, tailings facilities, and projects with sustained hydrostatic load.
- Prefabricated pipe boots, Vacuum-formed Industraline HDPE boots extrusion-welded to the main sheet on the containment side. Sourcing the boot from the same product line as the sheet eliminates mixed-supplier weld-bond risk.
- AquaSeal™ HDPE jointing tape, Field jointing for repairs, patches, and detailing where extrusion welding isn’t practical.
- Pre-welded large-format panels, Dual-track factory fusion welds in the Brisbane workshop reduce on-site seam count by 60 to 80% on typical projects.
Applications
- Pond and dam lining, stock dams, irrigation reservoirs, ornamental ponds, aquaculture. Industraline pond and dam liners →
- Mining tailings and leach pads, Industraline HD with prefabricated boots and full QA documentation pack at handover
- Civil & landscaping, slope erosion control, retaining wall back-drains, earth-cover ponds. Landscaping applications →
- Marine and aquaculture, pontoon piling, fish farm pond lining, seawater containment
- Secondary containment and bunding, chemical storage compounds, tank farm bunding, fuel storage facility lining
- Water treatment ponds, sedimentation, holding, polishing pond lining for council and industrial wastewater
- Geosynthetic civil construction, landfill caps, geomembrane-lined channels, geotextile cushion layers. Civil construction range →
Why specify Industraline
- Single-source supply, Geomembrane, geotextile, pipe boots, jointing tape, pre-welded panels, all from one Industraline product line.
- DVS 2207 welding, German welding standard, significantly more stringent than AS/NZS minimums.
- ISO 9001:2015, Independently certified by SGS. Single batch traceability per project, full QA documentation pack at handover.
- Brisbane workshop, since 1971, 50+ years of HDPE fabrication. Largest single-source HDPE fabricator in Queensland.
Frequently asked questions
Our brand of HDPE geomembrane, supplied in pond, dam, mining, landfill, civil and aquaculture grades with matched non woven geotextile underlay, prefabricated pipe boots and AquaSeal jointing tape, every component from a single product line so on site weld bonds are predictable.
Sourcing the pipe boot and accessories from the same product line as the sheet eliminates mixed supplier weld bond risk, with single batch traceability per project.
Dual track factory fusion welds in the Brisbane workshop reduce on site seam count by 60 to 80 percent on typical projects.
Yes. The Industraline Installation Manual and Specification Pack v2.0 is a free 20 page PDF covering anchor trench detail, pipe penetration boots, dual track wedge welding, QA testing and tender ready specification clauses.
For concentrated acids, strong oxidisers or aromatic hydrocarbons in continuous contact, request an Industraline chemical compatibility statement before specifying.
Trusted across the industries we serve
Get an engineered quote
Send drawings, a sketch, or a description of the duty. An engineer reviews every enquiry and confirms receipt within one business day.